The leathers used are European bull hides, approx. 1.20 m² in size and 4.5 mm thick. Its reinforced finish leaves a waxed touch, making it suitable for all uses and offering the possibility of panels in several formats.

Mini - 0.30 x 0.30 cm to maxi - 0.90 x 0.65 cm.

We provide you with a data sheet to help you with the installation and its preparation.

- Several video contacts are planned and necessary to familiarize the installer with the product.
- We'll give you all the tips and tricks you need to make the job easier.
- Like not bending the slabs, as this cracks the protective layer.
- Allow the tiles to rest for 8 days, so that they can stabilize in the ambient atmosphere, especially in certain regions of the world.
- Make sure the floor is flat and free of all residues before laying.
- Draw a laser starting square to the entrance and the dimensions of the tiles.
- Before starting installation, consider the plan provided and its reference points in accordance with the tiles, which are also numbered.
- Advice on priming, the recommended glue and its drying times, its application in small areas of 2 to 3 m², confirming pressure on the tiles for better adhesion, removing any glue stains with our assistance kit.
- Maintenance made easy with our kit.
- Protection from other trades if the job isn't finished.

Options

- Slabs can be laser-marked with acronyms, logos, motifs or other suggestions. Reserved for the Antique collection.

- A sticker can be placed under the tiles. For wall application

- Break assistance.